QNAP TS-101 Manual de usuario

TS-101 Turbo Station User Manual (Version: 2.0.0) ©Copyright 2007. QNAP Systems, Inc. All Rights Reserved.

Chapter 2 Install TS-101 2.1 Install Hard Disk 1. Unfasten the two round head screws at the back of TS-101. Pull out the front case of TS-101 a

3.9 Event Logs TS-101 can store thousands of recent event logs, including warning, error and information messages. In case of system malfunction

Chapter 4 Copy Data Directly by Front USB Port to TS-101 TS-101 supports direct copy of data on USB devices to TS-101 by using the Copy button. To

* xxxx: year ; yy: month; zz: date Note: USB auto copy function supports only USB device of 10GB storage capacity or less. - 102 -

Chapter 5 Multimedia Station 5.1 Share Photos and Multimedia Files via Web Interface TS-101 provides a user-friendly web management interface for

2. Click on the link http://TS-101 IP/Qmultimedia on Multimedia Station page or click Multimedia Station on the login page of TS-101 to access Multi

4. Click Browse to select the multimedia file and then click Upload to upload the file to the folder. 5. You can also create folders by clicking

B. Upload photos to Qmultimedia folder directly You can upload multimedia files to TS-101 directly by the following steps. 1. Use Run function in W

When you login Multimedia Station by web browser again, all multimedia files will be shown. Buttons on Multimedia Station page Sort files by name

View Photo Information 1. To view detailed information of a photo, click on the thumbnail of the picture. 2. The information of the photo, e.g.

Buttons Description You can use the buttons on top of the photo to manage the album. Back to previous level Previous image Next image Rotate imag

3. After installing the disk, cover TS-101 with the front case and fasten the round head screws. Then place TS-101 vertically on the stands. - 1

5.2 Enable iTunes Service Enable iTunes service on TS-101. The mp3 files on Qmultimedia folder of TS-101 will be shared via iTunes. All the compu

Note: You can download the latest iTunes software from official Apple website http://www.apple.com. - 111 -

5.3 Use UPnP Media Server TS-101 is built-in with TwonkyMedia, DLNA compatible UPnP media server. Enable this function and TS-101 will share parti

Click on the link http://TS-101 IP:9000/ to enter UPnP Media Server configuration page and configure the following settings. (1) Language: Select the

About UPnP and DLNA Universal Plug and Play (UPnP) is a set of computer network protocols promulgated by the UPnP Forum. The purpose of UPnP is to a

Chapter 6 Download Station TS-101 supports BT, HTTP, and FTP download mechanisms. You can add download task to TS-101 and let the server finish do

2. Click on the link http://TS-101 IP/Qdownload on Download Station page or click Download Station on the login page of TS-101 to access Download St

3. Select Add new BT task or Add new FTP/HTTP task. (A) Add new BT task Click Add new BT task on the left and upload a torrent file. You can do

(B) Add new FTP/HTTP task To run an FTP download task, click Add new FTP/HTTP task. Enter the FTP URL of the download task and select the share fol

5. You can select an available download task and click Set Share Time to configure the time for sharing the torrent file, or click Set Config to set

2.2 Hard Disk Recommendation List The following HDD models are verified by QNAP that are compatible with TS-101. It is recommended to use the disk

6. To pause a running download task, select the task in View Run list and click Pause/ Restart download task. You can view tasks that are paused o

8. To delete a running, paused, or finished task, select the task and click Delete download task. You can select to remove the download task only a

10. To access the folders you have downloaded, please go to the share folder Qdownload of TS-101. - 122 -

Dump Diagnostic Information To view the diagnostic details of a download task, select a task on the list and click [Dump Diagnostic Information].

The common reasons for slow BT download rate or download error are as below: (1) The torrent file has expired, the peers have stopped sharing this f

Chapter 7 Web Server TS-101 enables you to upload web pages and manage your own website easily by Web Server function. It also supports PHP and SQ

The file index.html, index.htm or index.php will be the home path of your webpage. - 126 -

3. Click on the link http://TS-101 IP/ on Web Server page or click Web Server on the login page of TS-101 to access the web page you upload. Note t

SQLite Management SQLiteManager is a multilingual web-based tool to manage SQLite databases and can be downloaded from http://www.sqlitemanager.org/

Chapter 8 FTP Server TS-101 supports FTP service. To use FTP service, enable this function in Network Settings and follow the steps below: 1. O

Maxtor Model Name Model No. Interface Capacity (GB) Rotational Speed (RPM) Buffer Size (MB) Grizzly 3H500F0 SATA II 3Gb/s 500 7200 16 Grizzl

b. Click FTP. c. Enter the user name and password to login FTP service. - 130 -

d. You can start to use FTP service. - 131 -

Chapter 9 Web File Manager Using Web File Manager To use Web File Manager, enable web service in Network Settings first. - 132 -

Launch the web browser and go to TS-101 administration page. Select Web File Manager and enter the correct login name and password. You can login a

Select an existing network share for management. You can organize network share folders of TS-101. With Web File Manager, you can upload, rename,

Rename file or folder i. Select a file or folder to rename. ii. Click (Rename) on the toolbar. iii. Enter the new file or folder name and click O

View Files Named in Local Language To view files named in Chinese, you may have to configure the browser settings. Take Internet Explorer as an exam

Web File Manager Icons Icon Description Return to the parent folder Refresh the current page Return to network share list home page Create folde

Chapter 10 NetBak Replicator NetBak Replicator is a powerful program installed in user’s system (Windows® OS only) for data backup. You can back

Install NetBak Replicator 1. Select Install NetBak Replicator in TS-101 CD-ROM. 2. Follow the steps to install NetBak Replicator. 3. Upon succ

2.3 Set up TS-101 Please check your network environment and select the appropriate installation method before installing TS-101. 1. Office/ Home

Use NetBak Replicator 1. Before using NetBak Replicator, please login TS-101 administration and go to Network Share Management to create a share fo

2. Run NetBak Replicator. Click . All TS-101 and their share folders within the network will be displayed. - 141 -

3. When the following window appears, all TS-101 in the LAN will appear on the left list. Select a server and a share folder on the right. NetBak

Description of Buttons on NetBak Replicator Open Configuration: Open a previously saved NetBak Replicator configuration. Save Configuration: Save

• Backup Select files and folders for backup. - 144 -

9 Start When you have selected the files for backup to TS-101, click Start on NetBak Replicator. The program will start to copy the selected files

9 File Filter Click File Filter on NetBak Replicator main page to select file format to be skipped from backup. Then click OK. - 146 -

9 Schedule Click Schedule on NetBak Replicator main page. Then check the box “Enable Backup Schedule” and select the frequency and time for backup.

9 Monitor Select a folder for monitoring. When this option is enabled, the system will upload all files or folders to the server instantly for back

9 Initialize Configuration When using this function, NetBak Replicator will record all current settings of the user, including whether or not monito

When you have verified your network environment, please follow the steps below to install TS-101. * Note: Please connect a USB printer to the serv

• Restore Please follow the steps below to restore files from TS-101 to your PC. a. Restore to original position: Select the location that the data

d. Option: Select recovery option and error option. If the restoring file existed, NetBak Replicator will: 9 Overwrite all the files 9 Ask first 9

• Log a. Save As…: To save all logs on NetBak Replicator, click this button. All logs will be saved as text file. b. Clear All: Click this button

Chapter 11 TS-101 Maintenance This section provides a general overview on system maintenance. 11.1 Restart/ Shut down Server Follow the steps be

11.2 Reset Administrator Password and Network Settings To reset the administrator password and network settings of TS-101, 1. Press the reset but

11.3 Disk Failure or Malfunction When you encounter disk malfunction or failure, please do the following: 1. Record the malfunction status or erro

Technical Support QNAP provides dedicated online support and customer service via instant messenger. You can contact us by the following means: Onli

GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, M

software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems intro

or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry promin

2.4 Check System Status TS-101 provides LED indicators for you to indicate system status and information easily. When TS-101 is turned on, please

a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a

this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to

8. If the distribution and/or use of the Program are restricted in certain countries either by patents or by copyrighted interfaces, the original cop

CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AN

LED Display & System Status Overview LED LED Display & System Status n Power Blue: System has started o Network Blink in orange: Accessing n

2.5 Configure Software Settings After checking the system status, please follow the steps below to configure the software settings of TS-101. The

2. Select Install Quick Install Wizard. - 19 -

FOREWORD Thank you for choosing QNAP products! This user manual provides detailed instructions of using TS-101. Please read carefully and start to

3. Run Quick Install Wizard. When the wizard prompts for performing quick configuration, click OK. 4. Enter the default user name and password.

When you have entered quick configuration page, follow the instructions to complete the settings. Click Next to continue. - 21 -

Step 1. Enter the server name and click Next. - 22 -

Step 2. Enter a new password or select to use the original password. Click Next to continue. - 23 -

Step 3. Select the time zone of your location or enter the date and time manually. You can also select to synchronize the time of TS-101 with an Int

Step 4. Select the encoding language of TS-101 and click Next. Note: All files and directories on TS-101 will be created using Unicode encoding.

Step 5. It is recommended to use DHCP protocol to acquire IP address automatically. If your network does not support DHCP, please enter the IP addre

Step 6. When a new hard disk is installed in TS-101, select “Initialize the hard disk now” and click Next to format and initialize the disk. Warnin

Step 7. You have finished quick configuration. Please make sure all settings are correct and click Next to start disk formatting. - 28 -

Step 8. Please wait patiently when the disk is being formatted. Formatting may take a few minutes depending on the capacity of your hard drive. Whe

Table of Contents Table of Contents ...3 Safety Warnings...

Congratulations! You have finished Quick Configuration. Your TS-101 is ready to use. TS-101 provides several default share folders for data sharing

a. For example, to map the folder Public as your drive, select the folder and click Map Network Drive. Note: The share folders Qdownload, Qmultim

c. Select the drive letter for the connection and click Finish. d. Upon successful connection, you can start to use the share folder on TS-101.

5. Quick Install Wizard will appear when all configurations are completed. Click on the name of TS-101 on the list to enter administration page.

6. When the administration page of TS-101 is shown, you can start to use the services. If you have any questions during web administration, please

2.5.1.1 Using Mozilla Firefox For higher security, some Firefox versions will close the ports of certain services. The default port for TS-101 adm

(4) Then enter 6000 and click OK. (5) The setting will be added to the list. You can now use Firefox to access port 6000 of TS-101. - 36 -

2.5.2 Mac Users A. Connect TS-101 by Mac directly or B. Connect TS-101 by the network. A. Connect TS-101 by Mac directly 1. Please go to Network

3. When the administration page is shown, click Administration. Enter the default user name and password to login. Default user name: administrato

4. Follow the step-by-step guide in Quick Configuration to complete the settings of TS-101. If you have any questions during web administration, pl

3.4.6 Multimedia Station...64 3.4.7 Download Station ...

B. Connect TS-101 by the network 1. Please go to Network settings to check and write down the subnet and router address of your Mac. Then select U

3. When the administration page is shown, click Administration. Enter the default user name and password to login. Default user name: administrator

4. Go to TCP/IP Configuration of Network Settings . Select to use static IP and input the IP address of TS-101. Make sure the value does not confl

Chapter 3 Start to Enjoy the Powerful Services of TS-101 TS-101 provides the following powerful functions and applications. A. Use network share-P

B. Manage TS-101 Manage TS-101 using web browser by Windows® or Mac 1. You can access TS-101 web administration page by the following methods: a

2. When the administration page is shown, click Administration, Web File Manager, Web Server, Multimedia Station, or Download Station. Enter the us

C. Use TS-101 Services  Multimedia Station TS-101 provides a user-friendly web management interface for you to manage and share personal albums an

 Backup Server NetBak Replicator is a powerful backup software designed for Windows® users to configure automatic backup schedule. Block level rem

3.1 Server Administration There are 8 main sections in server administration: - 48 -

3.2 Quick Configuration Please follow the step-by-step guide in Quick Configuration to complete the settings of TS-101. If you have any question

5.2 Enable iTunes Service ... 110 5.3 Use UPnP Media Server ...

Step 2. Change the administrator password or select to use the original password. Step 3. Enter the date, time and select the time zone for the s

Step 5. Enter the IP address, subnet mask and default gateway for the server. Note: 1. Please contact your ISP or network administrator for the

Step 7. When TS-101 is initialized, the basic settings will be shown. - 52 -

3.3 System Settings Basic system settings include the server name, date, time, and view system settings. 3.3.1 Server Name Enter the name of

3.3.2 Date & Time Set the date, time, and time zone according to your location. If the settings are incorrect, the following problems may occu

3.3.3 Encoding Setting Select the language TS-101 uses to display files and directories. Note: All files and directories on TS-101 will be created

3.4 Network Settings You can configure network settings in this section and enable several powerful applications of TS-101, e.g. Multimedia Stati

Primary DNS Server: Enter the IP address of primary DNS server that provides DNS service for TS-101 in external network. Secondary DNS Server: Enter

Jumbo Frame Settings (MTU) "Jumbo Frames" refer to Ethernet frames that are larger than 1500 bytes. It is designed to enhance Ethernet ne

3.4.2 Microsoft Networking Enable file service for Microsoft networking: If you are using Microsoft® Windows®, enable this service to access the

Safety Warnings 1. TS-101 can operate normally in the temperature of 0ºC-35ºC and relative humidity of 0%-85%. Please make sure the environment is

9 Domain Master There is a unique Domain Master Browser for collecting and recording resources and services available for each PC in the network or

3.4.3 Apple Network To use TS-101 on Apple Mac operating system, enable AppleTalk network support. If your AppleTalk network uses extended network

3.4.5 FTP Service When you enable FTP service, you can define the port number for the service and maximum number of users connected to the FTP at t

You can enable anonymous login to allow users to access the FTP server of TS-101 anonymously. The users can access the folders and files which are o

3.4.6 Multimedia Station To share multimedia files like photos, music or video files on the network, please enable Multimedia Station. For further

3.4.7 Download Station TS-101 supports BT, HTTP and FTP download independent of PC/notebook. To use download function of TS-101, please enable Dow

3.4.8 Web Server You can publish your own server by enabling Web Server function of TS-101. Enter the port number for web server service, the defa

3.4.9 DDNS Service To set up a server on the Internet and enable users to access it easily, a fixed and easy-to-remember host name is often requi

Note: The DDNS function of TS-101 is not applicable when TS-101 is located behind an NAT router. Since the IP address sent from TS-101 to DDNS prov

3.4.10 View Network Settings You can view current network settings and status of TS-101 in this section. - 69 -

Chapter 1 Overview of TS-101 Turbo Station 1.1 Introduction Thank you for choosing TS-101 Turbo Station. This product has the following key fea

3.5 Device Configuration You can configure SATA disk, USB disk, USB printer and external SATA (eSATA) disk in this section. 3.5.1 SATA Disk T

3.5.2 USB Disk TS-101 supports USB disks and thumb drives for extended storage and Q-RAID 1 function. You can select one of the following setting

Recover data from USB disk when the SATA disk of TS-101 fails: When the SATA disk of TS-101 fails, you can recover data from a backup disk if the di

3.5.3 USB Printer 1. To provide printer sharing function for network users, you can simply connect a USB printer to the USB port of TS-101. TS-10

3. Install the printer driver. 4. When finished, you can start to use network printer service of TS-101. Note: 1. TS-101 supports general USB

3.5.4 eSATA Disk TS-101 supports eSATA disk for extended storage and Q-RAID 1 function. You can connect an eSATA disk to the eSATA port of TS-101.

Recover data from eSATA disk when the SATA disk of TS-101 fails: When the SATA disk of TS-101 fails, you can recover data from a backup disk if the

3.6 User Management The files on TS-101 can be shared among multiple users. For easier management and better control of users’ access right, you

512 users can be created at maximum (including system default users). You can create a new user according to your needs. The following information

3.6.2 User Groups User group is a collection of users with the same access right to files or folders. TS-101 has created the following user groups

1.2 Package Contents Your TS-101 package contains: 9 TS-101 Turbo Station 9 Adaptor 9 Power cord 9 CD-ROM (user manual, Quick Install Wizard

Create Users and Assign Users to User Group The following example demonstrates how to create new users and assign users to a user group. ABC Co. ha

iii. Select the user groups the users belong to on the right list, i.e. Mr. Jones Lee for Administration Dept and Ms. Jane Wu for Sales Dept, and cl

Create Private Network Share for User Groups You can create particular network share for each user group. The procedure is described as below: 1.

3. You can see the folder media in Network Share Management page. 4. Enter Access Control. You can see that only Administration Dept has full a

3.6.3 Quota To allocate disk volume efficiently, you can specify the quota that can be used by each user. When this function is enabled and a user

2. Select Jones Lee on User page and click Quota Settings on the right. 3. Enter the quota size 2000MB and click OK. 4. Follow the same steps

3.7 Network Share Management The primary purpose of network storage is file sharing. You can create different network share folders for various

3.7.1 Create To create a network share, enter the following information: 9 Network share name The share name can be 32 characters long at maximum

3.7.2 Property To edit the property of an existing network share, select a share and click Property. You can then edit the content of that share.

3.7.3 Access Control When a network share is created, you can assign access rights to users or user groups: 9 Deny access Access to the network sh

1.3 Hardware Illustration One Touch Copy Button LED indicators: Status, HDD, eSATA, LAN and Power Power Button USB Ports eSATA Giga LAN Rese

3.8 System Tools System Tools enable you to optimize the maintenance and management of TS-101. - 90 -

3.8.1 Alert Notification Enter the e-mail address of the administrator and the IP address of the SMTP server. In case of warning or malfunction, e

3.8.3 Hardware Settings You can enable or disable the hardware functions of TS-101. i. Enable configuration reset switch By enabling this option,

3.8.4 System Update Note: If the system is running properly, you do not need to update the firmware. Before updating system firmware, please mak

3.8.5 Change Logo You can choose your own picture to display on the login page of TS-101. The size of the picture cannot exceed 20K bytes. - 94

3.8.6 Remote Replication (Disaster Recovery) Remote Replication enables you to replicate files on TS-101 to another TS-101 or QNAP NAS series. The

b. Complete all settings and click OK to save or Cancel to quit. c. The port for remote replication is 873. If you are using two TS-101 servers

ii. Edit a. Select the task to be edited. b. Click Edit. c. Modify the settings. d. Click OK to save or Cancel to quit. iii. Delete a. Selec

3.8.7 Backup/ Restore/ Reset Settings • To backup all settings, including user accounts, server name and network configuration etc., click Backup

3.8.8 Network Recycle Bin This function enables files deleted on the shares of TS-101 to be removed to Network Recycle Bin to reserve the files tem