QNAP Turbo Station TS-201 Manual de usuario

TS-201 Turbo Station User Manual (Version: 1.0.0) ©Copyright 2006. QNAP Systems, Inc. All Rights Reserved.

Chapter 2. Install TS-201 2.1 Install Hard Disk 1. Loosen the screws on the disk trays and take out the disk trays. 2. Install a hard disk

2. Click on the link http://TS-201 IP/Qmultimedia on Multimedia Station page or click Multimedia Station on the login page of TS-201 to access Mult

4. Click Browse to select the multimedia file and then click Upload to upload the file to the folder. 5. You can also create folders by clicking

B. Upload photos to Qmultimedia folder directly You can upload multimedia files to TS-201 directly by the following steps. 1. Use Run function in

When you login Multimedia Station by web browser again, all multimedia files will be shown. Buttons on Multimedia Station page Sort files by name

View Photo Information 1. To view detailed information of a photo, click on the thumbnail of the picture. 2. The information of the photo, e.g.

Buttons Description You can use the buttons on top of the photo to manage the album. Back to previous level Previous image Next image Rotate ima

Chapter 6. Download Station TS-201 supports P2P download mechanism. You can add download task to TS-201 and let the server finish downloading ind

2. Click on the link http://TS-201 IP/Qdownload on Download Station page or click Download Station on the login page of TS-201 to access Download S

3. Click Add new download task on the left and upload a torrent file. You can download legal torrent files by searching on the Internet. There ar

5. You can select an available download task and click Set Share Time to configure the time for sharing the torrent file, or click Set Config to se

3. Insert the disk trays to TS-201. Push the disk trays to the end. Fasten the screws on the trays. When two disks are installed, make sure HDD1

6. To pause a running download task, select the task in View Run list and click Pause/ Restart download task. You can view tasks that are paused o

8. To delete a running, paused, or finished task, select the task and click Delete download task. You can select to remove the download task only

10. To access the folders you have downloaded, please go to the share folder Qdownload of TS-201. - 112 -

Dump Diagnostic Information To view the diagnostic details of a download task, select a task on the list and click [Dump Diagnostic Information].

Chapter 7. Web Server TS-201 enables you to upload web pages and manage your own website easily by Web Server function. It also supports PHP and

The file index.html, index.htm or index.php will be the home path of your webpage. - 115 -

3. Click on the link http://TS-201 IP/ on Web Server page or click Web Server on the login page of TS-201 to access the web page you upload. Note

- 117 - SQLite Management SQLiteManager is a multilingual web-based tool to manage SQLite databases and can be downloaded from http://www.sqlitem

Chapter 8. FTP Server TS-201 supports FTP service. To use FTP service, enable this function in Network Settings and follow the steps below: 1.

b. Click FTP. - 119 - c. Enter the user name and password to login FTP service.

2.2 Hard Disk Recommendation List The following HDD models are verified by QNAP that are compatible with TS-201. It is recommended to use the dis

d. You can start to enjoy FTP service. - 120 -

Chapter 9. Web File Manager Using Web File Manager To use Web File Manager, enable web service in Network Settings first. Launch the web browse

Select an existing network share. You can organize share folders of TS-201. With Web File Manager, you can upload, rename, or delete files and fo

Rename file or folder i. Select a file or folder to rename. ii. Click (Rename) on the toolbar. iii. Enter the new file or folder name and click

View Files Named in Local Language To view files named in Chinese, you may have to configure the browser settings. Take Internet Explorer as an exa

Web File Manager Icons Icon Description Return to the parent folder Refresh the current page Return to network share list home page Create fold

Chapter 10. NetBak Replicator NetBak Replicator is a powerful program installed in user’s system (Windows® OS only) for data backup. You can bac

Install NetBak Replicator 1. Select Install NetBak Replicator in TS-201 CD-ROM. 2. Follow the steps to install NetBak Replicator. 3. Upon suc

Use NetBak Replicator 1. Before using NetBak Replicator, please login TS-201 administration and go to Network Share Management to create a share f

2. Run NetBak Replicator. Click . All TS-201 and their share folders within the network will be displayed. - 129 -

- 13 - Western Digital Model Name Model No. Interface Capacity (GB) Rotational Speed (RPM) Buffer Size (MB) WD Caviar® SE Serial ATA WD4000KD

3. When the following window appears, all TS-201 in the LAN will appear on the left list. Select a server and a share folder on the right. NetBak

Description of Buttons on NetBak Replicator Open Configuration: Open a previously saved NetBak Replicator configuration. Save Configuration: Save

• Backup Select files and folders for backup. - 132 -

9 Start When you have selected the files for backup to TS-201, click Start on NetBak Replicator. The program will start to copy the selected files

9 File Filter Click File Filter on NetBak Replicator main page to select file format to be skipped from backup. Then click OK. - 134 -

9 Schedule Click Schedule on NetBak Replicator main page. Then check the box “Enable Backup Schedule” and select the frequency and time for backup

9 Monitor Select a folder for monitoring. When this option is enabled, the system will upload all files or folders to the server instantly for bac

9 Initialize Configuration When using this function, NetBak Replicator will record all current settings of the user, including whether or not monit

• Restore Please follow the steps below to restore files from TS-201 to your PC. a. Restore to original position: Select the location that the dat

d. Option: Select recovery option and error option. If the restoring file existed, NetBak Replicator will: 9 Overwrite all the files 9 Ask first

2.3 Set up TS-201 Please check your network environment and select the appropriate installation method before installing TS-201. 1. Office/ Home

• Log a. Save As…: To save all logs on NetBak Replicator, click this button. All logs will be saved as text file. b. Clear All: Click this butto

Chapter 11. TS-201 Maintenance This section provides a general overview on system maintenance. 11.1 Restart/ Shut down Server Follow the steps

11.2 Reset Administrator Password and Network Settings To reset the administrator password and network settings of TS-201, 1. Press the reset bu

11.3 Disk Failure or Malfunction When you encounter disk malfunction or failure, please do the following: 1. Record the malfunction status or err

- 144 - Technical Support QNAP provides dedicated online support and customer service via instant messenger. You can contact us by the following

When you have verified your network environment, please follow the steps below to install TS-201. - 15 - 1 2 Network cable USB cable 3 1.

2.4 Check System Status TS-201 provides LED indicators for you to indicate system status and information easily. When TS-201 is turned on, please

- 17 - LED Display & System Status Overview LED LED Display & System Status nPower Blue: System has started oLAN Blink in orange: Accessi

2.5 Configure Software Settings After checking system status, please follow the steps below to configure software settings of TS-201. The config

2. Install Quick Install Wizard. - 19 -

FOREWORD Thank you for choosing QNAP products! This user manual provides detailed instructions of using TS-201. Please read carefully and start to

3. Run Quick Install Wizard. When the wizard prompts for performing quick configuration, click OK. Enter the default user name and password. De

When you have entered quick configuration page, follow the instructions to complete the settings. Click Next to continue. - 21 -

Step 1. Enter the server name and click Next. - 22 -

Step 2. Enter a new password or select to use the original password. Click Next to continue. - 23 -

Step 3. Select the time zone of your location or enter the date and time manually. You can also select to synchronize the time of TS-201 with an In

Step 4. Select the encoding language of TS-201 and click Next. - 25 - Note: All files and directories on TS-201 will be created using Unicode

Step 5. It is recommended to use DHCP protocol to acquire IP address automatically. If your network does not support DHCP, please enter the IP addr

Step 6. When one or two hard drives are installed in TS-201, select the RAID configuration and click Next to format. Note: All data on the drives

Step 7. You have finished quick configuration. Please make sure all settings are correct and click Next to start disk formatting. - 28 -

Step 8. Please wait patiently when formatting the disk(s). Formatting may take a few minutes depending on the capacity of your hard drives. When f

Safety Warnings 1. TS-201 can operate normally in the temperature of 0℃-35 and relative ℃humidity of 0%-85%. Please make sure the environment is

Congratulations! You have finished Quick Configuration. Your TS-201 is ready to use. TS-201 provides several default share folders for data sharin

a. For example, to map the folder Public as your drive, select the folder and click Map Network Drive. - 31 - Note: The share folders Qdownloa

c. Upon successful connection, you can start to use the share folder on TS-201. You can access these folders by opening My Computer. 4. Quick I

5. When the administration page of TS-201 is shown, you can start to use the services. If you have any questions during web administration, please

2.5.2 Mac Users TS-201 provides two methods for Mac users to connect to TS-201. You can select A. Connect TS-201 by Mac directly or B. Connect TS

3. When the administration page is shown, click Administration. Enter the default user name and password to login. Default user name: administrat

4. Follow the step-by-step guide in Quick Configuration to complete the settings of TS-201. If you have any questions during web administration, p

B. Connect TS-201 by the network 1. Please go to Network settings to check and write down the subnet and router address of your Mac. Then select

3. When the administration page is shown, click Administration. Enter the default user name and password to login. Default user name: administrato

4. Go to TCP/IP Configuration of Network Settings . Select to use static IP and input the IP address of TS-201. Make sure the value does not con

Table of Contents Table of Contents ...4 Chapter 1. Overview of

5. Click Yes to restart TS-201 for the changes to take effect. Please wait patiently for TS-201 to restart. 6. Connect your Mac and TS-201 to t

7. Click Administration and enter the default user name and password to login. Default user name: administrator Password: admin - 41 -

8. Follow the step-by-step guide in Quick Configuration to complete the settings of TS-201. If you have any questions during web administration, p

Chapter 3. Enjoy the Powerful Services of TS-201 TS-201 provides the following powerful functions and applications. A. Use network share-Public f

B. Manage TS-201 Manage TS-201 using web browser by Windows® or Mac 1. You can access TS-201 web administration page by the following methods:

2. When the administration page is shown, click Administration, Web File Manager, Web Server, Multimedia Station, or Download Station. Enter the u

- 46 - C. Use TS-201 Services  Multimedia Station TS-201 provides a user-friendly web management interface for you to manage and share personal

- 47 -  Backup Server NetBak Replicator is a powerful backup software designed for Windows users to configure automatic backup schedule. Block

- 48 - 3.1 Server Administration There are 8 main sections in server administration:

3.2 Quick Configuration Please follow the step-by-step guide in Quick Configuration to complete the settings of TS-201. If you have any questio

3.4.8 Web Server ... 64 3.4.9 View Network Settings ...

Step 2. Change the administrator password or select to use the original password. Step 3. Enter the date, time and select the time zone for the

Step 5. Enter the IP address, subnet mask and default gateway for the server. Step 6. Initialize disk volume in TS-201 for the first time config

Step 7. When TS-201 is initialized, the basic settings will be shown. - 52 -

3.3 System Settings Basic system settings include the server name, date, time, and view system settings. 3.3.1 Server Name Enter the name of

3.3.2 Date & Time Set the date, time, and time zone according to your location. If the settings are incorrect, the following problems may occ

3.3.3 Encoding Setting Select the language TS-201 uses to display files and directories. Note: All files and directories on TS-201 will be create

3.4 Network Settings You can configure network settings in this section and enable several powerful applications of TS-201, e.g. Multimedia Stat

Jumbo Frame Settings (MTU) "Jumbo Frames" refer to Ethernet frames that are larger than 1500 bytes. It is designed to enhance Ethernet n

3.4.2 Microsoft Networking Enable file service for Microsoft networking: If you are using Microsoft® Windows®, enable this service to access the

- 59 - 9 Domain Master There is a unique Domain Master Browser for collecting and recording resources and services available for each PC in the n

Chapter 10. NetBak Replicator ...126 Chapter 11. TS-201 Maintenance ...

3.4.3 Apple Network To use TS-201 on Apple Mac operating system, enable AppleTalk network support. If your AppleTalk network uses extended networ

3.4.5 FTP Service When you enable FTP service, you can define the port number for the service and maximum number of users connected to the FTP at

3.4.6 Multimedia Station To share multimedia files like photos, music or video files on the network, please enable Multimedia Station. For furthe

3.4.7 Download Station To use P2P download function of TS-201, please enable Download Station. For further information, please refer to Chapter 6

3.4.8 Web Server You can publish your own server by enabling Web Server function of TS-201. Enter the port number for web server service, the def

3.4.9 View Network Settings You can view current network settings and status of TS-201 in this section. - 65 -

3.5 Device Configuration You can configure SATA disk, USB disk and USB printer settings in this section. - 66 -

3.5.1 SATA Disk This page shows the model, size and current status of the disk(s) installed on TS-201. You can format and check disks, and scan b

- 68 - You can create the following disk volumes: • Single Disk Volume Each disk will be used as a standalone disk. However, if a disk is damag

3.5.2 USB Disk TS-201 supports USB disks and thumb drives for extended storage. Connect the USB device to the USB port of TS-201, when the device

- 7 - Chapter 1. Overview of TS-201 Turbo Station 1.1 Introduction Thank you for choosing TS-201 Turbo Station. This product has the followin

3.5.3 USB Printer 1. To provide printer sharing function for network users, you can simply connect a USB printer to the USB port of TS-201. TS-2

3. Install the printer driver. 4. When finished, you can start to use network printer service of TS-201. - 71 - Note: 1. TS-201 supports gen

3.6 User Management The files on TS-201 can be shared among multiple users. For easier management and better control of users’ access right, yo

512 users can be created at maximum (including system default users). You can create a new user according to your needs. The following information

3.6.2 User Groups User group is a collection of users with the same access right to files or folders. TS-201 has created the following user group

Create Users and Assign Users to User Group The following example demonstrates how to create new users and assign users to a user group. ABC Co. h

ii. Enter the user name (Jones Lee/ Jane Wu) and password. Check the box “Continue to set the user groups to which this user belongs” and click OK

iii. Select the user groups the users belong to on the right list, i.e. Mr. Jones Lee for Administration Dept and Ms. Jane Wu for Sales Dept, and c

iv. The user names will appear on the list on Create User Page. - 78 -

Create Private Network Share for User Groups You can create particular network share for each user group. The procedure is described as below: 1.

1.2 Package Contents Your TS-201 package contains: 9 TS-201 Turbo Station 9 Adaptor 9 Power cord 9 CD-ROM (user manual, Quick Install W

3. You can see the folder media in Network Share Management page. 4. Enter Access Control. You can see that only Administration Dept has full

3.6.3 Quota To allocate disk volume efficiently, you can specify the quota that can be used by each user. When this function is enabled and a use

2. Select Jones Lee on User page and click Quota Settings on the right. 3. Enter the quota size 2000MB and click OK. 4. Follow the same step

3.7 Network Share Management The primary purpose of network storage is file sharing. You can create different network share folders for various

3.7.1 Create To create a network share, enter the following information: 9 Network share name The length of the network share name cannot exceed

3.7.2 Property To edit the property of an existing network share, select a share and click Property. You can then edit the content of that share.

3.7.3 Access Control When a network share is created, you can assign access rights to users or user groups: 9 Deny access Access to the network s

3.7.5 Restore If the default network shares of TS-201 are not created successfully, you can use the Restore function to restore the network shares

3.8 System Tools System Tools enable you to optimize the maintenance and management of TS-201. - 88 -

3.8.1 Alert Notification Enter the e-mail address of the administrator and the IP address of the SMTP server. In case of warning or malfunction,

1.3 Hardware Illustration - 9 - K-Lock Security Slot USB 2.0 x 2 Giga LAN Reset Button Power Connector Power Button One Touch Copy Button U

3.8.3 Hardware Settings You can enable or disable the hardware functions of TS-201. i. Enable configuration reset switch By enabling this optio

3.8.4 System Update Note: If the system is running properly, you do not need to update the firmware. Before updating system firmware, please m

3.8.5 Change Logo You can choose your own picture to display on the login page of TS-201. The size of the picture cannot exceed 20K bytes. -

3.8.6 Remote Replication (Disaster Recovery) Remote Replication enables you to replicate files on TS-201 to another TS-201 or QNAP NAS series. Th

b. Complete all settings and click OK to save or Cancel to quit. Note: To use remote replication, enable Microsoft Networking service, make sure

ii. Edit a. Select the task to be edited. b. Click Edit. c. Modify the settings. d. Click OK to save or Cancel to quit. iii. Delete a. Sele

3.8.7 Backup/ Restore/ Reset Settings • To backup all settings, including user accounts, server name and network configuration etc., click Backup

3.9 Event Logs TS-201 can store thousands of recent event logs, including warning, error and information messages. In case of system malfunctio

- 98 - Chapter 4. Copy Data Directly by Front USB Port to TS-201 TS-201 supports direct copy of data on USB devices to TS-201 by using the Copy

Chapter 5. Multimedia Station TS-201 provides a user-friendly web management interface for you to manage personal albums easily. You can view ima